10 Safe Ways to Prevent Spitbacks

Published on : 08 December 20205 min reading time
One of the best aspects of vaporizing is that you can always try new and exciting flavors. Whether it’s a high quality liqueur with enhanced fruit flavors or a liqueur with a more traditional tobacco taste, you can choose from a wide range of flavors. Unfortunately, some people who vape cannot fully enjoy their vaporizing experience because of spitbacks. Spitbacks occurs when very hot droplets of e-liquor enter your mouth when you inhale. Basically, this can happen whenever the e-liquid is heated to boiling inside your e-cigarette, but does not evaporate completely. Spitback can make it difficult for you to taste the flavors you love. You might be tempted to stop spitbacking for a while, depending on how often you experience it. Fortunately, there are many ways to prevent spitbacks from happening again in the future. Here are ten different tips on how to reduce the amount of spitting with your vaporizing equipment.

Tip #1. Find out what type of electronic cigarette you have

One of the first things you should do is look at the type of e-cigarette you use, especially since some types of vaporizing equipment are more sensitive to spitting. For example, you’re more likely to get spit if you have an e-cigarette with a rebuildable reservoir (or RTA) sprayer rather than a sub-ohm reservoir. Reconstructable Tank Sprayers are more likely to allow e-liquid juice to build up inside the chamber, which can eventually cause it to overflow and cause spitting. You can avoid this either by re-wetting your reels or by getting an e-cigarette with a different type of tank.

Tip #2. Buy a drip tip that prevents spitting out

Another way to prevent spitting from occurring is to get some type of drip tip. You can buy one that is longer or has a slight curve, as it can make it harder for hot droplets of electronic fluid to travel up through the mouthpiece and into your mouth. If you don’t want to try this, you can try a sloped or rotating drip tip, as it will also lengthen the path of the airflow.

Tip #3. Switch to an E-liquid with a higher VG level

Then, exchange your low VG for an e-liquid with a higher VG level, so you will have fewer spitting problems. The PG has less consistency than the VG, so the e-liquid with high PG levels is more likely to flood an atomizer than the e-liquid that has a high VG.

Tip 4: Don’t over-saturate your wicks

You may need to dip the wick of your e-cigarette in the e-liquid before using the reel. Too much liquid can flood the chamber, which can lead to spit-back. You can avoid this by being very careful not to over-saturate your wicks. The wicks should be wet, but not so wet that the juice starts to accumulate around the reels of your e-cigarette.

Tip #5: Cover your tip with a drip cover

Another suggestion is to cover your drip tip with something that can prevent your e-liquid from entering your mouth. You can also look for a reservoir that is designed with specific anti-spindle back flow features so that you don’t have to worry about this problem.

Tip #6. Clean the chimney in your tank

Spitting can also occur when your e-liquid accumulates inside the tank chimney. Remove your drip cap and clean it regularly so that the liquid does not accumulate in the chimney and go back down to the coil inside your e-cigarette. This simple tip will greatly reduce the likelihood that spitting will ruin your vaporizing session.

Tip #7. Increase the power of your electronic cigarette

What is the power level of your e-cigarette? When the power is too low, your e-liquid may not evaporate completely. To fight against this, increase the power level of your e-cigarette if possible.

Tip #8. Avoid certain types of coils

Did you know that certain types of coils can cause spitting? For example, vapors that have an e-cigarette with Clapton or twisted coils are more likely to experience spit-up because of the way the coils are designed. Avoid certain types of multi-stranded coils so that your e-liquid cannot accumulate around the coil.

Tip #9. Wait before you start Vape

If all these suggestions are too many for you, another option is to wait a little before you start jumping. Let your vault go for a few seconds so you don’t have to taste it if spitting occurs. Don’t start inhaling until you’re sure it’s working properly.

Tip #10: Don’t Inhale Too Hard

Finally, we also suggest that you avoid inhaling too hard when you vaporize so that the e-liquid does not flood the room of your e-cigarette. You can also try to adjust the airflow to be lower.

Conclusion

Well, that’s it! We hope our advice was helpful. Spitback is extremely unpleasant, but there are several ways to prevent it from putting a stop to your spraying session. If you don’t want to try these suggestions, you can always buy an e-cigarette with components that will make spitback less likely.

4 tips on how to stealthily vape
Practical Predictions on the Future of Hands Free Vaping

Plan du site